ASTM   D1388

This   test method covers the measurement of stiffness properties of fabrics.   Bending length is measured and flexural rigidity is calculated. Experience our   recommended textile testing equipment adherent to ASTM D1388 here.

ASTM D1683

This   test method measures the sewn seam strength in woven fabrics by applying a   force perpendicular to the sewn seams. Experience our   recommended textile testing equipment adherent to ASTM D1683 here.

ASTM   D2061

These   test methods cover the determination of the strengths for zipper and zipper   parts. Experience our   recommended textile testing equipment adherent to ASTM D2061 here.

ASTM   D2136

Fabrics   coated with rubber or rubber-like materials display increased stiffening when   exposed to decreasing ambient temperatures. This test method describes a   simple pass/fail procedure whereby material flexibility at a specified low   temperature can be determined. Failure is indicative of unacceptability of   the coated fabric for use at that temperature. Experience our   recommended textile testing equipment adherent to ASTM D2136  here.

ASTM   D2208

This   test method covers the determination of the breaking strength of leather by   the grab method. It is intended for use on light, soft leathers; boarded,   sueded, or embossed leathers tested on a specimen in the form of a rectangle   piece; narrow strap, welt, lace, and round belt leathers; or other leathers   that cannot be accurately tested by Test Method D2209. This test method does   not apply to wet blue. Experience our   recommended textile testing equipment adherent to ASTM D2208 here.

ASTM   D2209

This   test method covers the determination of the load required to rupture a   leather test specimen having a 1/2-in. (12.7-mm) width. The load to rupture   divided by the original unstretched cross-sectional area gives the tensile   strength. It may be used for all types of leather that are smooth and firm   enough to permit accurate thickness measurements. Experience our   recommended textile testing equipment adherent to ASTM D2209 here.

ASTM   D2211

This   test method covers the measurement of the elongation or stretch   characteristics of leather produced by a tensile load. Experience our   recommended textile testing equipment adherent to ASTM D2211 here.

ASTM   D2212

This   test method covers the determination of the slit tear resistance of light   leathers such as shoe uppers, gloves, and upholstery. Experience our recommended   textile testing equipment adherent to ASTM D2212 here.

ASTM   D2213

This   test method covers the determination of the compressibility of sole   leather. Experience our   recommended textile testing equipment adherent to ASTM D2213 here.

ASTM   D2261

This   test method covers the measurement of the tearing strength of textile fabrics   by the tongue (single rip) procedure using a recording   constant-rate-of-extension-type (CRE) tensile testing machine. Experience our   recommended textile testing equipment adherent to ASTM D2261 here.

ASTM   D2594

This   test method covers the measurement of fabric stretch and fabric growth of   knitted fabrics intended for applications requiring low-power stretch   properties. Experience our   recommended textile testing equipment adherent to ASTM D2594 here.

ASTM   D3107

This   test method covers the determination of the amount of fabric stretch, fabric   growth, and fabric recovery of fabrics woven in whole or in part from stretch   yarns after a specified tension and extension. Experience our   recommended textile testing equipment adherent to ASTM D3107 here.

ASTM   D4393

This   test method covers the determination of peel adhesion of reinforcing fabrics   that are bonded to rubber compounds. It is applicable to either woven or   parallel cord textile structures from both natural and manmade fibers and to   parallel steel cord structures. Experience our   recommended textile testing equipment adherent to ASTM D4393 here.

ASTM   D4704

This   test method is intended for determining the tearing strength of leather by   measuring the force required to tear a specimen cut perpendicular to the   surface. Experience our   recommended textile testing equipment adherent to ASTM D4704 here.

ASTM   D4705

This   test method is intended for use in determining the stitch tearing resistance   of leather using a double hole tear. It is particularly applicable to   lightweight leathers. Experience our recommended   textile testing equipment adherent to ASTM D4705 here.

ASTM   D4786

This   test method is intended for determining the stitch-tearing strength of   leather with a tear originating from one hole. It is particularly applicable   to heavy leather. Experience our   recommended textile testing equipment adherent to ASTM D4786 here.

ASTM   D4831

This   test method is intended for use on all types of leather to determine the load   required to tear a leather strap fastened in a buckle. Experience our   recommended textile testing equipment adherent to ASTM D4831 here.

ASTM   D5034

This   test method covers the grab and modified grab test procedures for determining   the breaking strength and elongation of most textile fabrics. Provisions are   made for wet testing. Experience our   recommended textile testing equipment adherent to ASTM D5034 here.

ASTM   D5035

This   test method covers raveled strip and cut strip test procedures for   determining the breaking force and elongation of most textile fabrics.   Provision is made for wet testing. Experience our   recommended textile testing equipment adherent to ASTM D5035 here.

ASTM   D5170

This   test method covers the measurement of the peel strength of hook and loop   touch fasteners using a recording constant-rate-of-extension tensile testing   machine (CRE). Experience our   recommended textile testing equipment adherent to ASTM D5170 here.

ASTM   D5587

This   test method covers the measurement of the tearing strength of textile fabrics   by the trapezoid procedure using a recording constant-rate-of-extension-type   (CRE) tensile testing machine. Experience our   recommended textile testing equipment adherent to ASTM D5587 here.

ASTM   D5733

This   test method covers the measurement of the tearing strength of nonwoven   fabrics by the trapezoid procedure using a recording   constant-rate-of-extension (CRE) tensile testing machine. Experience our   recommended textile testing equipment adherent to ASTM D5733 here.

ASTM   D5735

This   test method covers the measurement of the tearing strength of nonwoven   fabrics by the tongue (single rip) procedure using a recording   constant-rate-of-extension (CRE) tensile testing machine. Experience our   recommended textile testing equipment adherent to ASTM D5735 here.

ASTM   D6077

This   test method covers the measurement of the tearing load of nonwoven fabrics by   the trapezoid method for leather. Experience our   recommended textile testing equipment adherent to ASTM D6077  here.

ASTM   D6571

This   test method covers the measurement of compression resistance and recovery   properties of any type of highloft nonwoven fabric using a simplistic and   economical applied static weight loading technique. Experience our   recommended textile testing equipment adherent to ASTM D6571 here.

ASTM   D6614

This   test method covers the determination of the amount of fabric stretch and   fabric growth after a specified extension and held for a specified   time. Experience our   recommended textile testing equipment adherent to ASTM D6614 here.

ASTM   D6644

This   test method measures the resistance of the bridge of a sew-through button to   a steadily increasing strain. Experience our   recommended textile testing equipment adherent to ASTM D6644 here.

ASTM   D6775

This   test method covers the determination of the breaking strength and elongation   of textile webbing, tape and braided materials using a split-drum type   specimen clamp. Experience our   recommended textile testing equipment adherent to ASTM D6775 here.

ASTM   D6797

This   test method describes the measurement for bursting strength of woven and   knitted textiles taken from rolls of fabric or fabric taken from   garments. Experience our   recommended textile testing equipment adherent to ASTM D6797 here.

BS   3356:1990

Method   for determination of bending length and flexural rigidity of fabrics. Experience our   recommended textile testing equipment adherent to BS 3356 here.

BS   3424-5:1982

Testing   coated fabrics. Methods 7A, 7B and 7C. Methods for determination of tear   strength. Experience our   recommended textile testing equipment adherent to BS 3424-5 here.

BS   4098:1975

Method   for the determination of thickness, compression and recovery characteristics   of textile floor coverings. Experience our   recommended textile testing equipment adherent to BS 4098 here.

BS   6906-8:1991

Methods   of test for geotextiles. Determination of sand-geotextile frictional behavior   by direct shear. Experience our   recommended textile testing equipment adherent to BS 6906-8 here.

BS EN   12242:2000

Touch   and close fasteners. Determination of peel strength. Experience our   recommended textile testing equipment adherent to BS EN 12242 here.

BS EN   13542:2001

Manufactured   articles filled with feather and down. Method for determining the   compressibility index of clothing. Experience our   recommended textile testing equipment adherent to BS EN 13542 here.

BS EN   13895:2003

Textiles.   Monofilaments. Determination of tensile properties. Experience our   recommended textile testing equipment adherent to BS EN 13895 here.

BS EN   1875-3:1998

Rubber   and plastics-coated fabrics. Determination of tear strength. Trapezoidal   method. Experience our   recommended textile testing equipment adherent to BS EN 1875-3 here.

BS EN   1876-1:1998

Rubber-   or plastics-coated fabrics. Low temperature tests. Bending test. Experience our   recommended textile testing equipment adherent to BS EN 1876-1 here.

BS EN   1897:2001

Geotextiles   and geotextile-related products. Determination of the compressive creep   properties. Experience our   recommended textile testing equipment adherent to BS EN 1897 here.

BS EN   29073-3:1992, ISO 9073-3:1992

Methods   of test for nonwovens. Methods of test for nonwovens. Determination of   tensile strength and elongation. Experience our   recommended textile testing equipment adherent to BS EN 29073-3 and ISO   9073-3 here.

BS EN

ISO   10319:1996,

ISO   10319:1993

Geotextiles.   Wide-width tensile test. Experience our   recommended textile testing equipment adherent to BS EN ISO 10319 and ISO   10319 here.

BS EN

ISO   10321:1996,

ISO   10321:1992

Geotextiles.   Tensile test for joints/seams by wide-width method. Experience our   recommended textile testing equipment adherent to BS EN ISO 10321 and ISO   10321 here.

BS EN

ISO   10618:2004

Carbon   fibre. Determination of tensile properties of resin-impregnated yarn. Experience our   recommended textile testing equipment adherent to BS EN ISO 10618 here.

BS EN

ISO   12957-2:2005

Geosynthetics.   Determination of friction characteristics. Inclined plane test. Experience our   recommended textile testing equipment adherent to BS EN ISO 12957-2 here.

BS EN

ISO   13431:1999

Geotextiles   and geotextiles-related products. Determination of tensile creep and creep   rupture behaviour. Experience our   recommended textile testing equipment adherent to BS EN ISO 13431 here.

BS EN

ISO   13934-1:1999

Textiles.   Tensile properties of fabrics. Determination of maximum force and elongation   at maximum force using the strip method. Experience our   recommended textile testing equipment adherent to BS EN ISO 13934-1 here.

BS EN   ISO 13934-2:1999

Textiles.   Tensile properties of fabrics. Determination of maximum force using the grab   method. Experience our   recommended textile testing equipment adherent to BS EN ISO 13934-2 here.

BS EN   ISO 13935-1:1999

Textiles.   Seam tensile properties of fabrics and made-up textile articles.   Determination of maximum force to seam rupture using the strip method. Experience our   recommended textile testing equipment adherent to BS EN ISO 13935-1 here.

BS EN   ISO 13935-2:1999

Textiles.   Seam tensile properties of fabrics and made-up textile articles.   Determination of maximum force to seam rupture using the grab method. Experience our   recommended textile testing equipment adherent to BS EN ISO 13935-2 here.

BS EN   ISO 13937-2:2000

Textiles.   Tear properties of fabrics. Determination of tear force of trouser-shaped   test specimens (single tear method). Experience our   recommended textile testing equipment adherent to BS EN ISO 13937-2 here.

BS EN   ISO 13937-3:2000

Textiles.   Tear properties of fabrics. Determination of tear force of wing-shaped test   specimens (single tear method). Experience our   recommended textile testing equipment adherent to BS EN ISO 13937-3 here.

BS EN   ISO 13937-4:2000

Textiles.   Tear properties of fabrics. Determination of tear force of tongue-shaped test   specimens (double tear test). Experience our   recommended textile testing equipment adherent to BS EN ISO 13937-4 here.

BS EN   ISO 14125:1998

Fibre-reinforced   plastic composites. Determination of flexural properties. Experience our   recommended textile testing equipment adherent to BS EN ISO 14125 here.

BS EN ISO   1421:1998

Rubber-or   plastics-coated fabrics. Determination of tensile strength and elongation at   break. Experience our   recommended textile testing equipment adherent to BS EN ISO 1421 here.

BS EN   ISO 2062:1995

Textiles.   Yarns from packages. Determination of single-end breaking force and   elongation at break. Experience our   recommended textile testing equipment adherent to BS EN ISO 2062 here.

BS EN   ISO 252-1:1999

Textile   conveyor belts. Adhesive strength between constitutive elements. Methods of   test. Experience our   recommended textile testing equipment adherent to BS EN ISO 252-1 here.

BS EN   ISO 283-1:2000

Textile   conveyor belts. Full thickness tensile testing. Determination of tensile   strength, elongation at break and elongation at the reference load. Experience our   recommended textile testing equipment adherent to BS EN ISO 283-1 here.

BS EN   ISO 3376:2002

Leather.   Physical and mechanical tests. Determination of tensile strength and   percentage extension. Experience our   recommended textile testing equipment adherent to BS EN ISO 3376 here.

BS EN   ISO 3377-1:2002

Leather.   Physical and mechanical tests. Determination of tear load. Single edge   tear. Experience our   recommended textile testing equipment adherent to BS EN ISO 3377-1 here.

BS EN   ISO 3377-2:2002

Leather.   Physical and mechanical tests. Determination of tear load. Double edge   tear. Experience our   recommended textile testing equipment adherent to BS EN ISO 3377-2 here.

BS EN   ISO 4674-1:2003

Rubber-   or plastics-coated fabrics. Determination of tear resistance. Constant rate   of tear methods. Experience our   recommended textile testing equipment adherent to BS EN ISO 4674-1 here.

BS EN   ISO 505:2000

Conveyor   belts. Method for the determination of the tear propagation resistance of   textile conveyor belts. Experience our   recommended textile testing equipment adherent to BS EN ISO 505 here.

BS EN   ISO 5079:1996

Textiles.   Fibres. Determination of breaking force and elongation at break of individual   fibres. Experience our   recommended textile testing equipment adherent to BS EN ISO 5079 here.

BS EN   ISO 9073-4:1997

Textiles.   Test methods for nonwovens. Determination of tear resistance. Experience our   recommended textile testing equipment adherent to BS EN ISO 9073-4 here.

BS EN   ISO 9073-7:1998

Textiles.   Test methods for nonwovens. Determination of bending length. Experience our   recommended textile testing equipment adherent to BS EN ISO 9073-7 here.

BS ISO   3341:2000

Textile   glass. Yarns. Determination of breaking force and breaking elongation. Experience our   recommended textile testing equipment adherent to BS ISO 3341 here.

BS ISO   3342:1995

Textile   glass. Mats. Determination of tensile breaking force. Experience our   recommended textile testing equipment adherent to BS ISO 3342 here.

BS ISO   3597-2:2003

Textile-glass-reinforced   plastics. Determination of mechanical properties on rods made of   roving-reinforced resin. Determination of flexural strength. Experience our   recommended textile testing equipment adherent to BS ISO 3597-2 here.

BS ISO   3597-3:2003

Textile-glass-reinforced   plastics. Determination of mechanical properties on rods made of   roving-reinforced resin. Determination of compressive strength. Experience our recommended   textile testing equipment adherent to BS ISO 3597-3 here.

BS ISO   4606:1995

Textile   glass. Woven fabric. Determination of tensile breaking force and elongation   at break by the strip method. Experience our   recommended textile testing equipment adherent to BS ISO 4606 here.

EN   14689

Leather.   Physical and mechanical tests. Determination of bagginess, creep and   relaxation. Experience our   recommended textile testing equipment adherent to EN 14689 here.